1300 522 725 sales@crealt.com.au
Select Page

P8000 and P8100

Polarimeters without temperature control P8000 and P8100

Compact polarimeter with proven features

The polarimeter models P8000 and P8100 are the right choice for all applications where sample temperature control for high-precision measurements is not absolutely necessary. The devices are suitable for nearly all samples as the parts that come in contact with the sample are chemical resistant. The P8000 and P8100 are recommended for all basic applications. Instead of a temperature control, the temperature can be compensated according to ICUMSA. That allows you to take measurements at any temperature; the results will then be converted to the desired temperature. In addition, the international sugar scale has been predefined on our devices, and the initial weight is taken into account for the conversion into the specific rotation.

  • Suitable tubes for any type of sample
  • Temperature measurement directly inside the sample
  • Reliable temperature compensation
  • Highest accuracy over the entire measurement range
  • Very short measurement time of approx. 1 s
  • Measurement up to an optical density of 3.0
  • Intuitive operation via touch-screen display
  • Predefined scales (opt. rotation, spec. rotation, int. sugar scale, concentration)
  • Any number of freely definable scales with conversions based on tables or formulas
  • Chemical-resistant materials
  • Compliance with GMP/GLP, 21 CFR Part 11, Pharmakopöen (USP, BP, JP, Ph. Eur.), FDA, ISO, HACCP, OIML, ASTM, ICUMSA, NIST

Typical applications

The P8000 and P8100 are especially recommended in case of a high sample throughput in the sugar industry.

  • Determination of concentrations in raw materials, preliminary, intermediate and end products
  • Determination of sugar concentration
  • Monitoring of chemical processes, e.g. during the manufacture of invert sugar

A comprehensive overview of typical applications with the polarimeters of the P8000 series can be found in our campus article on polarimeter applications.

Conformity with national and international standards

A big advantage of normalized measurements is the comparability of the measurement results. In many international standards and guidelines, polarimeters are recommended for specific measurement tasks as suitable measuring instruments. The requirements for the measuring devices, such as measuring accuracy and measuring temperature, are dependent on the respective measuring task and defined in each standard. We have compiled for you an overview of all known standards and guidelines, which refer to polarimetry.

  • Association of Analytical Communities (AOAC)
  • American Society for Testing and Materials (ASTM)
  • European Honey Commission (EHC)
  • International Commission for Uniform Methods of Sugar Analysis (ICUMSA)
  • European Pharmacopoeia (Ph. Eur.)
  • United States Pharmacopoeia (USP)

Polarimeter Standards (PDF, 110 KB)

Any questions?
Feel free to contact us, we will assist you in choosing the right polarimeter for you.

Measuring optically active substances

Many biologically important substances such as amino acids, sugars, enzymes or receptors are chiral compounds and have the ability to rotate linear-polarized light. Almost all natural amino acids rotate linearly polarized light to the left, whereas natural sugars (eg D-glucose) almost exclusively turn right. These substances have the same physical properties as density, melting point, boiling point or IR spectrum except for their optical activity. Depending on the direction of rotation, chiral substances can have very different physiological effects on living organisms. Therefore, measurement of optical purity with a polarimeter is an important quality criterion in the production of chiral drugs in the pharmaceutical industry. Due to the proportionality of the rotation value α and the concentration c, it is possible to carry out quantitative content determination of sugar solutions in the sugar processing industry (saccharimetry).

A high-quality optics, intelligent evaluation logarithms, LEDs with different wavelengths and a consistent measuring accuracy over the entire measuring range are available for the quantification and characterization of all optically active substances.

In the following table we have compiled an overview of frequent samples from our customers. Most samples were measured at standard measurement conditions (20 ° C, λ = 589 nm). Deviations are indicated. The measurements given are not specifications.

Polarimeter samples and their optical rotation (PDF, 138 KB)

Any questions?
Get in contact with us, we will assist you in choosing a suitable polarimeter.

Model specifications

  P8000 P8100
MEASUREMENT DATA
SCALES Optical rotation [°] 
Int. sugar scale [°Z] 
Concentration [g/100 ml] 
Spec. rotation 
User-defined
MEASUREMENT RANGES ±90° 
±259 °Z
MEASUREMENT ACCURACY ±0.003° 
±0.01 °Z
±0.002° 
±0.01 °Z
RESOLUTION 0.001° 
0.01 °Z
MEASUREMENT PERIOD ±90° Approx. 1 s
LIGHT SOURCE 1 LED with filter
WAVELENGTH 589 nm
TEMPERATURE DATA
TEMPERATURE CONTROL Can be retrofitted (requires water bath thermostat PT31 or PT80 
sample chamber bushing P8020 and temperature-controlled measurement tube PRG-100-ET)
TEMPERATURE MEASUREMENT With temperature probe PRT-E or PRT-T
TEMPERATURE MEASUREMENT RANGE 0–99.9 °C
TEMPERATURE MEASUREMENT RESOLUTION 0.1 °C
TEMPERATURE MEASUREMENT ACCURACY ±0.2 °C

Technical data polarimeter (PDF, 6 MB)

Digital refractometers with peltier temperature control

Resources & Downloads

P8000 and P8100 Enquiry

For more information or to arrange a call from one of the Cea Analytical Team, please complete the contact form below.  If your enquiry is urgent, please call us on 1300 552 725.

P8000 and P8100 Enquiry

NATIONAL OFFICE

EMAIL

sales@crealt.com.au

accounts@crealt.com.au

service@crealt.com.au

GET SOCIAL

PHONE

NSW: +61 2 4320 6672

VIC: +61 3 9017 4496

QLD: +61 7 3333 2171

WA: +61 8 6465 4576

NZ: +64 212 372 731

CONTACT US