1300 522 725 sales@crealt.com.au
Select Page

Gas analyser for O2 measurements

Gas analyser for O2 measurements MAT1100

Fast measurement of O2 concentration with EC-cell

The MAT1100 is the right choice whenever you only need to be concerned with the oxygen concentration or whenever only nitrogen is used. Its electrochemical oxygen cell (EC) measures within the range of 0.5 and 35 volume per cent and with an accuracy of ±0.2 volume per cent. Unlike our other models, the MAT1100 requires very little time to heat up and can therefore be quickly used for occasional measurement or in case of frequent “changes of location”.

  • Easy and intuitively to use via touch-screen – even by untrained personnel
  • Low-drift electrochemical oxygen cell (EC)
  • Short measurement period
  • Only a small sample volume required
  • Very short warm-up time <10 s
  • Interface package for convenient transfer of measured values (USB, Ethernet, RS-232)

Typical applications

The gas analysers MAT1100 are the ideal solution for the food, electronics, pharmaceutical or cosmetics industry. The measuring range of the electrochemical oxygen cell of 0.5 to 35 vol .-% O2 makes them particularly interesting for products such as fresh fruit, raw low-fat fish or crustaceans, which are not packaged under an oxygen-free or oxygen-rich protective atmosphere. Since this measuring cell is quickly ready for use after switching on, it is recommended for sporadic random checks or if only a few samples are measured every day.The low-drift long-life cell in our MAT1100 and MAT1200 devices boasts an above-average service life of up to six years. Unlike conventional alkaline cells, it uses an acidic electrolyte (formic acid), which is why its cross-sensitivity toward acidic gas components such as carbon dioxide is low and a measured value correction as a function of the CO2 concentration is not required. The carbon monoxide in coffee packages or flammable gas components such as alcohol also do not influence the specified accuracy. A typical application is the control of oxygen concentrations in the following products:

  • Coffee
  • Dried fruit
  • Pet food
  • Fresh fruits and vegetables
  • Dried nuts etc.
  • Hard cheese
  • Biscuits

A comprehensive overview of typical applications of the gas analyzers of the MAT1000 series can be found in our campus article on gas analyzer applications.

Model specifications

  MAT1100
MAIN SPECIFICATIONS
SCALES Oxygen, any number of user-defined scales
OXYGEN (O2)
MEASUREMENT RANGE 0.5–35 vol%
ACCURACY ±0.2 vol%
RESOLUTION 0.1 vol%
O2-SENSOR
TYPE Electrochemical cell (EC)
MEASUREMENT PRINCIPLE Acidic electrolyte
SERVICE LIFE Up to 6 years (at 20 vol% O2)
CROSS-SENSITIVITY No CO2-cross-sensitivity
DRIFT Low drift, < 3 %/month

Digital refractometers with peltier temperature control

Resources & Downloads

Gas analyser MAT1100 Enquiry

For more information or to arrange a call from one of the Cea Analytical Team, please complete the contact form below.  If your enquiry is urgent, please call us on 1300 552 725.

Gas analyser MAT1100 Enquiry

NATIONAL OFFICE

EMAIL

sales@crealt.com.au

accounts@crealt.com.au

service@crealt.com.au

GET SOCIAL

PHONE

NSW: +61 2 4320 6672

VIC: +61 3 9017 4496

QLD: +61 7 3333 2171

WA: +61 8 6465 4576

NZ: +64 212 372 731

CONTACT US