1300 522 725 sales@crealt.com.au
Select Page

DIGTOR 22C-U

Max. capacity: 4 x 100 ml. (8/6”)
Max. speed: 2.425 xg / 3.000 RPM

The most affordable option in the range of centrifuges for oil laboratories that, due to regulations, do not need heating. It has the same accessories as the heated models, all of them are especially designed for working with oily substances as well as the reagents used in regulations applicable with oil.

Effective, quick, versatile, allowing you to work with 6” and 8” conical profile tubes, pear type tubes and “finger” type tubes for small volumes. It has a pre-installation for incorporating a gas release system at any time during the life of the equipment.

Features

Designed for oil/petrol applications according the standards: ASTM D 91, D 893, D 2273, D 2709, D 5546, API 2542, API 2548, BS 4385, DIN 51793.

Tubes upright on rest.

Gas Release System (GRS): Gas release system (optional); pre-installation included.

TFT color touch screen, visible from more than 3 m.:

  • Shows RPM and RCF, time, acceleration/deceleration values (PCBS) and unbalancing location system (ULS).
  • Speed programming in 10 RPM/10 xg steps.
  • Real RCF values on screen based in accessories configuration.
  • Count up/down from “0” or at “set RPM/RCF” for test reproducibility.
  • Timer countdown/up from “0” or at “set RPM/ RCF” for reproducible tests.
  • Timer from 1 min to 99 hours programmable in 1 sec. steps and hold position.
  • PCBS: Progressive controlled acceleration and braking system up to 175 selectable ramps that prevents sample homogenization after separation.
  • ULS: Unbalancing location system indicating on the screen the number of the bucket which produces the unbalance switch off.
  • 40 programmable memories, with protection under password.
  • Several acoustic and visual messages warning the user the device situation.
  • Microprocessor controlled. PC connection.
  • Induction motor maintenance free (brushless).
  • Rotors and adapters list on memory.
  • Noise level: below 60 dB.
  • Start, stop, open lid and short spin with adjustable speed buttons.
  • Option of free/locked adjustment of RPM/ RCF along the run.
  • Automatic open lid, programmable
  • Last values remain in memory.
  • Automatic rotor recognition. Over-speed protection.
  • Lid provided with security systems:
    – Automatic lid lock system, motorized with double lock.
    – Emergency lid-lock release.
    – Locking and protection against opening along the run.
    – Lid dropping protection.
    – Port in the lid for calibration and operation checking.
  • Unbalance detection and switch off.
  • Protection safety ring between the centrifugation chamber and the housing.
  • Chamber of centrifugation in stainless steel (easy cleaning).
  • Rotors and adapters autoclavable, easy to install by the user.
  • Forced ventilation to reduce temperature increasing.
  • Automatic disconnection for energy saving up to 8 h., with deactivation option.

EU Directives: 2011/65/EU, 2012/19/EU, 2014/30/EU, 2014/35/EU, 98/79/EC.
Standards: EN 61010-1, EN 61010-2-101, EN 61010-2-020, EN 61326-2-6,  EN 61326-1.

Resources & Downloads

Digtor 22C-U Enquiry

For more information or to arrange a call from one of the Cea Analytical Team, please complete the contact form below.  If your enquiry is urgent, please call us on 1300 552 725.

Digtor 22C-U Enquiry

RT 293

Rotor: Swing out
Max. capacity: 4 x 100 ml. (8/6”)
RPM Max.: 3.000
Radius (mm): 241
RCF Max. (xg): 2.425

8

RT 289

Rotor: Swing out
Max. capacity: 4 x 100 ml. (8”)
RPM Max.: 3.000
Radius (mm): 241
RCF Max. (xg): 2.425

NATIONAL OFFICE

EMAIL

sales@crealt.com.au

accounts@crealt.com.au

service@crealt.com.au

GET SOCIAL

PHONE

NSW: +61 2 4320 6672

VIC: +61 3 9017 4496

QLD: +61 7 3333 2171

WA: +61 8 6465 4576

NZ: +64 212 372 731

CONTACT US