1300 522 725 sales@crealt.com.au
Select Page

Heat Transfer

Fundamentals of Heat Transfer

Cross Flow Heat Transfer

Model No: HE350
Description: This Cross Flow Heat Transfer is designed for assists students to understand the basic principles of cross flow heat transfer.

Film and Dropwise Condensation Unit

Model No: HE163
Description: This Film and Dropwise Condensation Unit demonstrates two types of condensation processes, namely filmwise and dropwise condensation.

Flow Boiling Heat Transfer Unit

Model No: HE153
Description: This Flow Boiling Heat Transfer Unit is designed to provide students with a clear visual demonstration of what is happening inside the vapour generating tubes of practical plants.

Fluidisations and Fluid Bed Heat Transfer

Model No: HE162
Description: This Fluidisations and Fluid Bed Heat Transfer Unit Unit is designed to provides visual understanding and quantitative results on the flow of air through both packed and fluidized bed of granular material.

Forced Convection Heat Transfer Apparatus

Model No: HE108
Description: This Forced Convection Heat Transfer Apparatus is designed for students to inspect hypothesis and associated formulae related to forced convection in pipes.

Free and Forced Convection Heat Transfer Unit

Model No: HE106
Description: This Free and Forced Convection Heat Transfer unit is designed for demonstrates phenomena of natural (free) and force convection.

Heat Conduction Study Bench

Model No: HE105
Description: This Heat Conduction Study Bench is designed to provides an introduction into the concepts of heat conduction using one dimensional conduction modules. The linear test section is supplied with interchangeable samples of conductors and insulators.

Heat Transfer in Agitated Vessel

Model No: HE185
Description: This Heat Transfer in Agitated Vessel is dedicated to introduce students to the study of heat transfer in an agitated vessel with coil and stirrer.

Heat Transfer Service Unit

Model No: HE111
Description: The Heat Transfer Service Unit can be connected to any of the seven optional heat transfer study units allow study of different modes of heat transfer.

Natural Convection and Radiation Unit

Model No: HE107
Description: This Natural Convection and Radiation Unit is designed to allow students to study the phenomena of heat transfer over a range of pressures and vacuum, and to determine the emissivity value of the heater element.

Pool Boiling Heat Transfer Unit

Model No: HE154
Description: This Pool Boiling Heat Transfer Unit is designed for vividly demonstrates two regimens of boiling, namely nucleate boiling and film boiling.

Radiation Heat Transfer Rig

Model No: HE155
Description: This Radiation Heat Transfer Rig is designed to provides students with knowledge in the fundamental laws governing heat transfer by radiation, such as: Inverse Square law Kirchhoff’s law Lamberts Cosine Law

Temperature Measurement Apparatus

Model No: HE151
Description: This Temperature Measurement Bench is a complete, self-contained apparatus to demonstrate fundamental temperature measurement techniques.

Thermal Conductivity Experimental Apparatus

Model No: HE115
Description: This Thermal Conductivity Experimental Apparatus is a bench mounting apparatus to allow students to demonstrate the conduction along the metal test specimens.

Thermal Conductivity of Building Materials Apparatus

Model No: HE110
Description: This Thermal Conductivity of Building Materials Apparatus is designed to determine the thermal conductivities of various building materials.

Thermal Conductivity of Insulating Powder

Model No: HE157-A
Description: This Thermal Conductivity of Insulating Powder unit is designed for allows the determination of thermal conductivity of insulating powder.

Thermal Conductivity of Insulating Powder

Model No: HE157
Description: This Thermal Conductivity of Insulating Powder unit is designed for allows the determination of thermal conductivity of insulating powder.

Thermal Conductivity of Liquids and Gases

Model No: HE156
Description: This Thermal Conductivity of Liquid and Gases is designed to provides students with knowledge in the fundamental laws governing heat transfer by radiation.

Thermal Conductivity of Solid, Liquid and Gas

Model No: HE116
Description: This Thermal Conductivity of Solid, Liquid and Gas is designed to determine the thermal conductivity of various solids, liquids and gases.

Thermal Conductivity of Solids

Model No: HE118
Description: This Thermal Expansion of Solids is designed to allow students to study the relationship between the length and the temperature of a solid.

Unsteady State Heat Transfer Unit

Model No: HE178
Description: This Unsteady State Heat Transfer Unitis designed to allow students to run experiments on unsteady state heat transfer.

Applied Heat Transfer

Concentric Heat Exchanger

Model No: HE104
Description: This Concentric Heat Exchanger is developed to investigate the fundamental principles of heat transfer applied to a classic two tubes heat exchanger.

Glass Shell and Tube Heat Exchanger Studies Units

Model No: HE667
Description: This Glass Shell and Tube Heat Exchanger Studies Units is designed for alternative model to HE 668, the Glass Shell and Tube Heat Exchanger Studies Unit allows visual observation inside the heat exchanger. This unit can also be fitted with an air cooled radiator to recycle the heated water.

Heat Exchanger Training Apparatus

Model No: HE158
Description: This Heat Exchanger Training Apparatus is alternative model to HE158C, HE158 provides a jacketed stirred vessel heat exchanger in place of a shell and coiled tube heat exchanger.

Plate Heat Exchanger

Model No: HE200
Description: This Plate Heat Exchanger is designed to introduce students to the principles of a plate exchanger.

Heat Exchanger Training Apparatus

Model No: HE158C
Description: This Heat Exchanger Training Apparatus is designed to familiarize students with different types of heat exchangers:

Plate Heat Exchanger

Model No: HE104-P
Description: This Plate Heat Exchanger is designed to demonstrate the working principles of industrial heat exchangers.

Shell & Tube Heat Exchanger

Model No: HE104-ST
Description: This Shell & Tube Heat Exchanger is developed to investigate the fundamental principles of heat transfer as applied to a liquid-to-liquid heat exchanger.

Shell and Tube Heat Exchanger

Model No: HE668
Description: This Shell and Tube Heat Exchanger is designed to introduce students to the principles of a shell and tube exchanger.

Solar Energy Demonstration Unit

Model No: HE191
Description: This Solar Energy Demonstration Unit is designed to demonstrate the principles of thermodynamics related to the field of solar energy. Students will be able to study the basic principles of the conversion of solar radiation into thermal energy.

NATIONAL OFFICE

EMAIL

sales@crealt.com.au

accounts@crealt.com.au

service@crealt.com.au

GET SOCIAL

PHONE

NSW: +61 2 4320 6672

VIC: +61 3 9017 4496

QLD: +61 7 3333 2171

WA: +61 8 6465 4576

NZ: +64 212 372 731

CONTACT US