1300 522 725 sales@crealt.com.au
Select Page

Fluid Mechanics

Fundamentals of Fluid Mechanics

Bernoulli’s Theorem Demonstration Unit

Model No: SFM24
Description:The Bernoulli’s Theorem Demonstration unitis designed to demonstrate the principles of Bernoulli’s theorem.

Cavitation Demonstration Unit

Model No: FM10
Description: This Cavitation Demonstration Unit has been designed to demonstrate to students the phenomenon of cavitation.

Dead Weight Pressure Calibrator

Model No: FM44
Description: This Dead Weight Pressure Calibrator is designed to demonstrate calibration of a Bourdon type pressure gauge.

Demonstration Pelton Turbine

Model No: FM41
Description: This Demonstration Pelton Turbine unit provides a simple low cost introduction to turbine performance.

Flow Over Weirs

Model No: FM26
Description:This Flow Over Weirsapparatus comes with two weir plates of different shapes, allowing familiarisation and comparison with weir theory. The unit is capable to demonstrate flow characteristic cover.

Flow Visualisation Apparatus

Model No: FM22
Description: This Flow Visualisation Apparatus is designed to provide flow visualization of various drag bodies.

pH Measurement and Calibration Experiment System

Model No: FM42
Description: This Free & Force Vortex is designed to generate and measure free and forces vortices.

Gravimetric Hydraulic Bench

Model No: FM110-G
Description: This Gravimetric Hydraulic Bench is designed for students to control water flow in a wide variety of laboratory experiments via gravimetric weighing system.

Hydraulic Bench

Model No: FM110
Description: This Hydraulic Bench is designed to complement a wide range of accessories for experiments on the subjects of fluid mechanics. The unit consists of upper and lower mouldings mounted on a steel structure fitted with lockable wheels. The mouldings are made of fiberglass for lightweight and corrosion resistant features. An open channel and volumetric measuring tank are incorporated with the bench along with the means for mounting and connecting various accessories.

Hydraulic Ram

Model No: FM39
Description: This Hydraulic Ram comprises a cast iron base incorporating pulse and non-return valves and a supply reservoir on a stand which is fed by the Hydraulic Bench. An air vessel above the valve chamber smooth cyclic fluctuations from the ram delivery.

Hydrostatic Pressure

Model No: FM35
Description: This Hydrostatic Pressure apparatus is designed to introduce the concept of centre of pressure of an object immersed in fluid.

Impact of Jet Apparatus

Model No: FM31
Description: This Impact of Jet Apparatus is designed for study on the force developed by a water jet impinging on different non-moving targets

Laminar Flow Table

Model No: FM23
Description:This Laminar Flow Tableis designed to simulate ideal fluid flow and give clear visualization of the flow patterns created using water as the working fluid. This enables a comprehensive investigation into the principles of potential flow and allows modeling appropriate physical systems.

Liquid Mixing Equipment

Model No: FM103
Description: This Liquid Mixing Equipment is a benchtop unit designed for visualization of solid/liquid and liquid-liquid mixing.

Metacentric Height

Model No: FM43
Description: This Metacentric Height allows a thorough investigation of factors affecting the stability of a floating body.

Orifice and Jet Flow Unit

Model No: FM25
Description: This Orifice and Jet Flow Unit is designed to demonstrate measurement of orifice discharge and jet flow.

Orifice Discharge

Model No: FM12
Description: This Orifice Dischargeis designed to demonstrate the measurement of orifice discharge.

Osborne Reynolds Demonstration

Model No: FM11
Description: This Osborne Reynolds Demonstration is designed to reproduce the classic experiments by Professor Osborne Reynolds on visualization of fluid flow.

Particle Drag Coefficient Apparatus

Model No: FM4102
Description: This Particle Drag Coefficient Apparatus is designed to introduce the fundamental characteristics of particle / fluid systems, in particular the relationship between drag coefficients of falling particles and Reynolds number.

Pipe Friction Apparatus

Model No: FM111
Description: This Pipe Friction Apparatus is designed for students to measure pipe friction losses for laminar and turbulent flows.

Pipe Surge and Water Hammer Apparatus

Model No: FM04
Description:This Pipe Surge and Water Hammer Apparatusis designed for experiments on the transient effects of pipe surge and water hammer as a result of gradual or instantaneous changes in fluid velocity.

Pitot Static Tube

Model No: FM50
Description: This Pitot Static Tube is designed for students to determine the change in flow speed within a tube cross-sectional.

Pressure Gauge Calibration Bench

Model No: FM01
Description: This Pressure Gauge Calibration Bench is a complete laboratory bench for pressure gauge calibration.

Pipe Friction Apparatus

Model No: FM01B
Description: This Pressure Measurement Bench is a complete laboratory bench for test and calibration of different types of pressure measuring elements.

Properties of Fluids and Hydrostatics Bench

Model No: FM02
Description: This Properties of Fluids and Hydrostatics Benchis a self contained and mobile bench equipped with all necessary apparatus for a comprehensive range of experiments on the properties and basic principles of fluids.

Serial/Parallel Pump Test Rig

Model No: FM07A
Description: This Serial/Parallel Pump Test Rig is designed to demonstrate to students the operating characteristic of centrifugal pump in single configuration, series configuration & parallel configuration. Basic instruments are included to monitor the pump speed, pump head and flow rate.

Venturi Meter

Model No: FM40
Description: This Venturi Meter is designed for experiments on the usage of a venturi. The venturi test piece has a circular cross section and is accurately machined from clear acrylic material with pressure measurement tappings at the converging/diverging sections and throat.

Flow in Pipes

Energy Losses in Bend and Fittings

Model No: FM34
Description: This Energy Losses in Bend and Fittings is designed for investigation of energy losses in pipe bends and fittings, including valves. This will enable students to appreciate energy losses associated with different devices.

Flowmeter Measurement Apparatus

Model No: FM101
Description: This Flowmeter Measurement Apparatus is designed to introduce students to the operating characteristic of various types of flowmeters.

Demonstration 3-Term Controller unit

Model No: FM100
Description: This Fluid Friction Measurement Apparatus is designed for students to study the fluid friction head losses of an incompressible fluid flow.

Losses In Pipes and Fittings Apparatus

Model No: FM36
Description: This Losses In Pipes and Fittings Apparatus is designed for students to energy losses in pipes and fittings including valves.

Modular Level Process Control Trainer

Model No: FM06
Description: This Pipe Network Apparatus is designed for students to measure flows and pressure drops in a wide range of pipe network configurations using water as the fluid.

Hydrology

Fire and Gas Detection System

Model No: FM33
Description: This Drainage & Seepage Tank is designed for students to study the flow through permeable media.

Flow Control Trainer

Model No: FM27
Description: This Flow Channel & Flume Apparatus is designed for students to study the principles of open channel flow. This unit comes with an open channel made of transparent working section mounted on a strong framework.

Level Control Trainer

Model No: FM77
Description: This Flow Channel and Flume Apparatus is a bench top unit designed for easy installation. This equipment introduces students to the basic concept of flow characteristics in an open channel.

Modular Level Process Control Training System

Model No: FM531
Description: This Ground Water Flow Unit is designed for demonstrations of the operating characteristics of three different types of pumps. Sensors are included to monitor pump speed, power, pump head and flow rate, enabling students to produce pump characteristics curves.

Hydrology Study System Apparatus

Model No: FM512
Description: This Hydrology Study System Apparatus is designed to demonstrate the run-off hydrographs from model catchments, construction of draw-down curves for one or two well systems in a sand bed , hydraulic gradients in ground water flow, investigation of model stream flow in alluvial material, formation of river features and development over time, and sediment transport, bed load motion, scour and erosion.

Rainfall Hydrographs

Model No: FM03
Description: This Rainfall Hydrographs is a bench scale unit designed to allow students to study different situations of rainfall runoff. Student shall be able to obtain catchment rainfall and runoff values as functions of time.

Soil And Water Model Tank

Model No: FM514
Description: This Soil And Water Model Tank is developed to investigate several aspects of surface irritation and drainage system.

Turbomachinery Application

Axial Fan Demonstration Unit

Model No:FM51
Description: This Axial Fan Demonstration Unit consists of a self contained bench top unit with a small scale axial fan and all the necessary instrumentations.

Axial Flow / Turbine Test Rig

Model No: FM60
Description:This Axial Flow / Turbine Test Rig is designed to study the performance of a pump/turbine in four different modes of operation.

Centrifugal Fan Demonstration Unit

Model No: FM52
Description: This Centrifugal Fan Demonstration Unit consists of a self contained bench top unit with a small scale centrifugal fan and all the necessary instrumentations, allowing students to study the effect of different types of fans.

Centrifugal Pump Demonstration Unit

Model No: FM54
Description: This Centrifugal Pump Demonstration Unit is designed for students to perform the characteristic studies of a centrifugal pump.

Multi Turbine Test Set (3 Turbines)

Model No: SE701E-6
Description: This Multi Turbine Test Set (3 Turbines) unit is designed to demonstrate the operation of three types of turbines and their performance characteristics such as mechanical power, hydraulic power, hydraulic efficiency and specific speed. The turbines will be driven by a 3kW pump, together with dynamometer and data acquisition system (Optional).

Multi-Pump Test Rig

Model No: SE701A-3
Description: This Multi-Pump Test Rig is designed for demonstrations of the operating characteristics of three different types of pumps. Sensors are included to monitor pump speed, power, pump head and flow rate, enabling students to produce pump characteristics curves.

Multi-Pump Test Rig

Model No: SE701E-6
Description: This Multi Turbine Test Set is fitted with six pumps and sensors necessary to allow pump characteristics study for different pumps.

Plunger Pump Demonstration Unit

Model No: FM18-B
Description: This Plunger Pump Demonstration Unit is designed to demonstrate the working principle of a plunger or ram pump.

Fundamentals of Aerodynamics & Airflow

Air Flow Bench

Model No: FM21
Description: This Air Flow Bench Unit is designed to demonstrate the principles of compressible fluid flow, the basic unit comes with a motor driven centrifugal fan for studying air flow characteristics.

Gas Flow Measurement Bench

Model No: FM120
Description:This Gas Flow Measurement Bench is designed for students to study the fluid flow of compressible gas.

Ventilation Trainer

Model No: FM801
Description: This Ventilation Trainer is designed to demonstrate the basic operation of air ventilation.

NATIONAL OFFICE

EMAIL

sales@crealt.com.au

accounts@crealt.com.au

service@crealt.com.au

GET SOCIAL

PHONE

NSW: +61 2 4320 6672

VIC: +61 3 9017 4496

QLD: +61 7 3333 2171

WA: +61 8 6465 4576

NZ: +64 212 372 731

CONTACT US