SmartChem® 600
Automated Discrete Analyzer
SmartChem® 600 Discrete Analyzer is a fully automated, wet chemistry direct read platform for photometric and electrochemical analysis. It is designed for demanding laboratories seeking to enhance their performance and boasts up to 600 tests per hour and a capacity of up to 200 on-board samples.
Overview
High Capacity, High Throughput Floor Model Automated Discrete Analyzer Platform
Benefits
- Increased efficiency and productivity through instrument consolidation and testing automation. Free-up your staff from tedious and repetitive tasks.
- Microlitre reactions – Reduced reagent usage and waste generation – improved cost efficiency and environmental footprint.
- Guaranteed stability, reproducibility and traceability with our ready-to-use dedicated reagents.
- Improved automation level with our optional bar code readers for reagents and samples – allowing full LIMS integration.
- Automated out-of-range retesting decision making.
Cost and environmental efficiency via our Cuvette Monitored Wash Cycle. - Optimization of time-consuming techniques such as pH, Cond, ORP.
Features
- Multi-parametric (consolidation) automated platform
- Photometric and Electrochemistry analysis
- Automated integrated reagents and samples barcode reader (optional)
- Automated start-up to instrument readiness
- Low water consumption
- IF THEN driven test sequences
- Programmable and monitored cuvette wash module
- Reagent inventory system and liquid level sensing
- pH/Cond/ORP and Nitrate add-on modules available
- Available ready-to-use reagents for diverse methods
The SmartChem® 600 is widely used for the automation of manually run wet chemistry testing in environmental, industrial, and research laboratories, including regulatory and quality control testing.
Its applications include, but are not limited to:
- Water and environmental
- Soil extracts, plant extracts, and fertilizers
- Food and feed
- Beverages, wine and beer
- Chemical
See our list of test parameters by sub-segment here (not limited)
The SmartChem® 600 uses direct read photometry, utilizing a true discrete, direct read measurement system and reusable, high-purity optical cuvettes, eliminating compromised sample measurement.
SmartChem® simplifies your laboratory’s work in a short series of steps:
- Load samples and reagents in your SmartChem®
- Set up your test
- Load your work program in the SmartChem® software
- Launch your programmed routine
- Get the results
Its continuous loading capability makes it an ideal tool for laboratories that want to reduce the daily workload of their personnel and improve their productivity without compromising quality or user satisfaction.
Additionally, SmartChem® cuvettes are being washed after each use, making them available for the next reaction/measurement and reducing your dependence on consumables and their availability.
With capacity to load up to 100 reagent bottles, SmartChem® 600 is a truly versatile analyzer to automate your laboratory’s routine and free your personnel to address other important tasks.
Available Configurations
The SmartChem® system is modular, allowing you to configure your analyze.
Ready-to-Use Reagents
We offer a full range of enzymatic and colorimetric reagents dedicated to our SmartChem® range of discrete analyzers.
Developed, tested and validated by our application laboratory, they guarantee perfect stability and reproducibility of your analyses.
Very easy to use, they are liquid, supplied in specific bottles made for SmartChem®, and automatically detected by the barcode reader (optional). This ready-to-go solution simplifies the preparation of your analysis and facilitates the use and storage of reagents. It also secures your analyses with reagents adapted to your application and your instrument.
To order reagents, please send an email to service@crealt.com.au
The SmartChem® 600 analyzer’s operation is completely computer based with the dedicated, intuitive and user-friendly software. This software is bidirectional LIMS and NELAC/EPA or NELAC-EPA compliant.
SmartChem® software simplifies routine work and allows complete control and operation of the analyzer to the operator controlling the on-board reagent stock, samples, controls and calibrators, plus the status of the cuvettes in the reaction chamber.
System Monitor
SmartChem® 600 software simplifies routine work and allows complete control and operation of the analyzer to the operator controlling the on-board reagent stock, samples, controls and calibrators, plus the status of the cuvettes in the reaction chamber.
Calibration Curve
Operators can access calibration status, use curves and historic calibration data, as well as monitor the status of specific tests, reaction curves and other on-going testing data.
Workplan Setup
The operator can easily load reagents and samples using the optional SmartChem® barcode reader and design the work routine for the analyzer to run, defining tests to run per sample, calibrations, and QC controls, etc.
Reflex and re-tests IF-THEN instances can be programmed, allowing specific actions to be automated in case of out-of-range results and/or any instances defined by the testing routine being defined by the laboratory.
Ongoing Analysis
The operator can, at any moment, see the status of each sample, reagent content per bottle and other information during the programmed run, plus enter new reagents and samples while the unit is running an already launched program.
Workplan Results
During and at the end of the routine, the operator can access the tests reports and results.
Levey-Jennings Graph
Quality controls can be evaluated via Levey-Jennings plots and results from the run can also be validated.
Additional Software Features
- Automatic start-up: including calibrations and blanks
- Automatic shutdown
- Barcode for reagents: auto ID and loading with Ready to Use reagents
- Barcode for samples: auto ID – automated work routine loading with LIMS
- Addition of new sample or method to a sample during the run
- Retest key
- Accurate time to test completion information
- Calibration points recalculation
- Last accepted calibration overlay
- Pre-dilution
- Standard curves
- Computer controlled micro pipettor
- NELAC – EPA compliant
- Real-time information on sample and reagent status
- Dynamic monitoring of test run
| Dimensions | Height x Width x Length: 96 x 70 x 120 cm (37.8 x 27.6 x 47.2 in.) |
|---|---|
| Weight | 115 kg (254 lbs) |
| Power | 430 Watts |
| Assay Type | End Point, Kinetic, Differential, Bi Chromatic Assays, Fully Programmable, pH, Conductivity, ORP |
| On-Board Reagents | Up to 100 Reagents can be Loaded into the Refrigerated Compartment and Distributed on: 5 Removable Racks (8 Main Positions) + 5 Satellites 100/50/25/5 mL Containers Reagents Barcode Reading (Integrated) |
| Sample Loading | Up to 200 Samples on Board 2 Independent Carousels Hosting 20 Racks of 10 Positions Each, for Continuous Sample Loading Cups and/or Tubes of 10-13 mm (0.4-0.5 in.); Maximum Height of 100 mm (3.9 in.) Sample Tube Camps for Sensitive Applications Sample Barcode Reading (Integrated) |
| Urgent Sample Analysis | Allowed at Any Time |
| Throughput | Up to 600 Tests/Hour (Including 120 for EC Tests) |
| Reading System | Direct Photometry Photometer: Diode Filter Array Wavelength: 12 Wavelengths Available from 340 nm to 880 nm Source: Halogen Lamp 6V/10W Optical Path: 10 mm Linear Range: 0.001 – 2.500 Abs Resolution: 0.0001 Abs |
| Minimum Reaction Volume | 180 μl |
| Sampling System | 3 Sampling Arms (1 for Samples and 2 for Reagents) 3 Shock Sensors 3 Capacitive Liquid Level Sensors 2 Positions for Stirrer/Mixer Automatic Probe Washing Sample Rerun with or without Dilution Limited Water Consumption (Less than 7 Liters/Hour) |
| Dilutor | Automatic Dilution in Pre- and Post-Dilution |
| Reaction Plate | Holds 85 Cuvettes that Perform the Following Operations: Automatic Cuvette Washing Incubation Temperature Control 37°C (98.6°F) +/- 0.3 Continuous Monitoring of Cuvette Quality Separate Waste Lines to Minimize Hazard Disposal Management Use of Washable Cuvettes (Green Technology) |
| Available Configurations | Optional Analytical Modules: NO3 Reduction Module and/or EC Module Cuvette Material: Technical Polymer Sample Position: 200 Barcode Reader: Samples and Reagents (Integrated) |
| Complementary Products | Ready-to-Use Reagents |
Other Models in the Series
SmartChem® 200
Automated Discrete Analyzer
Fully automated wet chemistry analyzer designed for photometric and electrochemical analyses, capable of processing up to 200 tests per hour. The unit features optional modules for pH, conductivity, ORP analysis, and nitrate sample preparation alongside a reagent cooling system, barcode reader, and unique onboard nitrate cadmium reduction module with regeneration capability.
SmartChem® 210
Automated Discrete Analyzer
Fully automated benchtop discrete analyzer designed for photometric wet chemistry analysis offering throughput of up to 300 tests per hour with optional nitrate sample preparation modules.
SmartChem® 450
Automated Discrete Analyzer
Fully automated wet chemistry analyser designed for efficient photometric and electrochemical analysis, achieving throughput of up to 450 tests per hour. Capable of handling up to 100 samples, controls, and calibrators, along with 72 different reagents, it includes optional modules for pH, conductivity, ORP, and nitrate sample preparation.
SmartChem® 600 Enquiry
For more information or to arrange a call from one of the Crea Team, please complete the contact form. If your enquiry is urgent, please call us on +61 2 4320 6670.
SmartChem® 600 Enquiry
NATIONAL OFFICE
Crea Laboratory Technologies
U4/4 Teamster Close
PO Box 3791
TUGGERAH NSW 2259
T: +61 2 4320 6670
GET SOCIAL
TERMS & CONDITIONS
PHONE
NSW: +61 2 4320 6672
VIC: +61 3 9017 4496
QLD: +61 7 3333 2171
WA: +61 8 6465 4576
NZ: +64 212 372 731
ISO CERTIFICATION
